This Wyse tech note will detail how to change the default User and Administrator remote shadow passwords. It involves capturing the hex key for the VNC password, this may then be deployed to other terminals via Rapport.

See the Rapport script example:
http://www.freewysemonkeys.com/site/modules.php?name=Downloads&d_op=viewdownloaddetails&lid=33&ttitle=ChangeVNCpassword_XPe.zip

This download will install the Certificates Snap-in for the MMC on XPe images (SP2). Simply unzip into the C:/Windows/System32 folder and run the batch file. Open the certmgr.msc to get to the console, this console may be required to add certificates for devices such as Wireless Network cards that use certificates.

Add the files created in this download to the C:/Windows/System32 folder on XPe Thin Clients to add support for the Cisco Aironet AIR-CB21AG wireless network card on a V90. Tested with XPe Sp1 and SP2 images, use the Cetificates Snap-in download if you need to add certs for LEAP.

This white paper looks at how to create partitions on XPe to store data that is excluded from the Enhanced Write Filter

For the full artical see this link

Unzip my files on usb key in a directory WESKB for example, create a directory KBWYSE in this directory and copy all KB WYSE you need , the EXE no need to unzip my script will do it for you. Launch the script : CreateList.cmd And after you can launch the script RunHF.bat after each time the unit reboot (depending the KB). There is a system with log tag files created on usb key, so when you have finished a unit there is a cmd file to launch to remove all log files and used the process for another unit: DeleteLog.cmd

This download describes how to install McAfee 8 AV on XPe Thin Clients. You will need to create an unprotected D: drive first, see this article here on the steps to do this.

This should fix an issue with older XPe units that pull multiple TSCALs.

This download contains files to add support to Windows NT for USB mass storage devices and adds the ability to use fat32 with NT.
These files can be added to NTe terminals to support USB memory keys under RDP and Citrix. DirectX 6 can also be added to improve multi-media.

Small util which turns the numlock on.

If you want the numlockon after a boot, simply copy the program in the start-up folder of the user (or all users).

This BIOS can be used to upgrade Wyse V90's to support wide screen resolutions and screen rotation. You will also need to upgrade the XPe drivers, see the readme.txt in the download for full instructions.